I-Jiangsu Baodie Automation Equipment Co., Ltd.

  • linkedin
  • i-twitter
  • facebook
  • youtube
English
Iphrinta ye-3D ye-Filament Extrusion Line (Uhlobo Olujwayelekile) Isithombe Esifakiwe

Iphrinta ye-3D Filament Extrusion Line (Uhlobo Olujwayelekile)

  • Isivinini sokukhiqiza:

    DN1.75mm 120-150m/min, DN3.0mm 45-55m/min.

  • Lawula ukunemba:

    Φ3.0 mm kuya ku-2.9 mm, 1.70 kuya ku-1.80 mm. (Ubukhulu ≤±0.04mm, Isilinganiso≤±0.03mm, CPK≥1.6).

Incazelo:

Ukuphrinta kwe-3D, okuwuhlobo lobuchwepheshe be-prototyping esheshayo, kuwuhlobo lobuchwepheshe bokuphrinta obusekelwe kufayela lemodeli yedijithali, kusetshenziswa insimbi eyimpuphu noma izinto zokunamathisela epulasitiki, ukwakha into ngesinyathelo ngesinyathelo.

Iphrinta ye-3D iyisisetshenziswa “esingaphrinta” into ye-3D, isebenze njengobuchwepheshe bokwakha i-laser, yamukela ukucubungula okulandelanayo, isimiso sokwakheka kwe-superposition, ngokwandisa isitaki sezinto ezibonakalayo ngesinyathelo ngesinyathelo ukukhiqiza iyunithi ye-3D.

Ubuchwepheshe bokuphrinta be-3D ngokwayo abuyona inkimbinkimbi kakhulu, kodwa izinto ezitholakalayo ezidliwayo kube nzima. Izinto ezisetshenziswayo zephrinta ezivamile ziyinki nephepha, kodwa izinto ezisetshenziswayo zephrinta ye-3D ikakhulukazi ziyipulasitiki nezinye izimpushana, futhi kufanele zibe ngokucubungula okukhethekile, nemfuneko ephezulu yejubane lokuphendula lokwelapha.

ukucubungula, futhi imfuneko ephezulu yejubane lokuphendula lokwelapha.

● Umumo we-3D printer filament: Intambo eyisiyingi eqinile

● Impahla eluhlaza: I-PLA, i-ABS, i-HIPS, i-PC, i-PU, i-PA, i-PEEK, i-PEI, njll.

● OD: 1.75 mm / 3.0 mm.

Ukucaciswa kwesicelo sefilament yephrinta ye-3D kudinga okokusebenza kwe-extrusion ukuthi kube nezici eziyisisekelo "zokulawula usayizi onembile nokusebenza kahle okuphezulu".


Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Ulwazi Lomkhiqizo

Ukuma kwe-3D iphrinta yepulasitiki ye-plastic filament yizintambo eziyindilinga eziqinile okwamanje, impahla eluhlaza eyinhloko ine-PLA, i-PVA, i-HIPS, i-ABS, i-PC, i-PA, i-TPU njll., imikhiqizo isukela ku-1.75 mm kuya ku-3.0 mm ububanzi. I-BAOD EXTRUSION inikeze umshini wokuqala wesethi ye-3D PRINTER FILAMENT extrusion kumakhasimende ngo-2009, ngemva kwesikhathi eside ukuthuthukiswa okuqhubekayo kokucushwa kwemishini kanye nobuchwepheshe bokukhipha, sisungule isethi ekhethekile ekhethekile yolayini we-3D printing consumables extrusion, ukufanisa nesikulufu esisekelayo kanye ne-extrusion. ubuchwepheshe bokubumba, bunganelisa ngezinhlobo ezahlukene zokukhiqiza izinto.

asf
i-asfa
aa

Eyethuinzuzo

sagifa

Izici Zomugqa Womshini

1. I-SERVO driveis egcwele ifakwe kuwo wonke ulayini womshini, iholela ekusebenzeni okuzinzile kwezingxenye ngayinye kulayini we-extrusion, njengokuncibilika kwe-ncibilika, ukuncibilika kwemitha, ukudonsa, njll.;

 

2. Ifakwe uhlelo lwephampu yemitha, iqinisekisa ukunemba kokuncibilika kokuncibilika, okwamanje khulisa ukucindezela kwekhanda lokufa ukuze ugweme ukungena ngaphakathi kocingo;

 

3. Ifakwe i-laser gauge ye-diameter ye-inthanethi nomsebenzi wokulawula impendulo yobubanzi obuzenzakalelayo, lawula ukubekezelelana kobukhulu kuye kunani elincane, ikhuphule izinga lawo wonke umugqa wokuzenzakalela;

 

4. Ukusongwa nokunqamula ngokulawula uhlelo lwe-SERVO drive & PLC ukuze ubone ukujikajika okuku-inthanethi okunembe nokuhlelekile (okuhlanzekile), ukujikajika okutholakala kukho kokubili i-spool enkulu nencane.

OKUNINGI

Imikhiqizo Ehlobene

Chofoza u-enter ukuze useshe noma u-ESC ukuze uvale